| Below is a list of articles with the most recent ones listed first. |
 |
|
How to setup Launch Control on VEMS by Marc Swanson |
Topic: Technical Documents |
guide to setting up launch control on VEMS
|
| Published: Friday 25 February, 2011 |
 |
|
How to build a cam position sensor (CPS) tester by Marc Swanson |
Topic: Technical Documents |
|
| Published: Monday 14 February, 2011 |
 |
|
tds-1 user's guide by Marc Swanson |
Topic: Technical Documents |
tds-1 user's guide
|
| Published: Friday 17 September, 2010 |
 |
|
TDS-1 Installation instructions by Marc Swanson |
Topic: Technical Documents |
|
| Published: Friday 17 September, 2010 |
 |
|
01a solid shift linkage upgrade install instructions by Marc Swanson |
Topic: Technical Documents |
01a solid shift linkage install instructions
|
| Published: Monday 13 September, 2010 |
 |
|
VEMS firmware upgrade procedure by Marc Swanson |
Topic: Technical Documents |
How to upgrade firmware on your VEMS ecu
|
| Published: Saturday 26 June, 2010 |
 |
|
VEMS V3 user guide (for non plug and play/Econoseal ECUs) by Marc Swanson |
Topic: Technical Documents |
VEMS V3 user guide (for non plug and play/Econoseal ECUs).
|
| Published: Thursday 10 June, 2010 |
 |
|
Simple, Cheap, Effective electronic knock detection tool by Marc Swanson |
Topic: Technical Documents |
|
| Published: Thursday 16 April, 2009 |
 |
|
Audi S4/S6 LS2 Coil Kit Installation Instructions by Marc Swanson |
Topic: Technical Documents |
Installation instructions for the EFI Express Plug and Play LS2 coil conversion kit for the 1992 to 1995.5 Audi S4/S6.
|
| Published: Sunday 01 March, 2009 |
 |
|
VEMS PnP S4/S6 Installation Instructions by Marc Swanson |
Topic: Technical Documents |
|
| Published: Friday 18 April, 2008 |
 |
 |